Home > Pressure & Temperature Transmitters > POD - Plug On Display

Plug On Display


Plug On Display


Product Specifications

  • Universal 4 Digit LED display
  • Suitable for any 4-20mA 2 wire
  • DIN43650 connector
  • No external power required
  • Single point available for alarm activation or control

The POD series is a universal 4 digit LED plug-on display for transmitters with 4-20mA 2 wire output and fitted with DIN43650 connector. The plug-on display simply fits between the transmitter plug and connecting cable socket and is powered from the 4-20mA current loop signal of the transmitter. No additional power is required.

Display settings are stored in non-volatile EEPROM, and can be easily modified through the menu using two programming buttons. Calibration parameters (zero, span, decimal point position, filter, and set-point level) can all be reprogrammed and stored and retained when power is removed. The display assembly inside the enclosure can be rotated through 90º steps, which will suit any mounting angle and simply installation.

The standard model is the POD-A but the POD-B can be programmed to open or close at a single set-point level. The output can then by used to trigger an alarm or provided external controller.

Typical applications for the plug-on display include use on pressure, temperature, level, RH, or flow transmitters for local readout, alarm activation or control.